Timber Parquet 3-Strip Oak Flame
Timber 3-strip Oak Flame has the following characteristics:
GradingNatural - this grading requires a moderate amount of knots and no sharp color changes. Sapwood is rare.
SurfaceBrushed is the result of working the surface of the board with a stiff metal brush. The brushing process removes soft wood fibers. The coating acquires a natural look and a relief surface.
Finish coatingThe lacquer coating has a high level of protection against moisture and mechanical damage. A lacquered floor does not require frequent maintenance and cannot be repaired locally.
BevelTimber 3-Strip Oak Flame has no bevel. The laid floor looks smooth and solid.
Slat widthStandard is the most common measure for all manufacturers. Standard width parquet is suitable for any room size.
Wood hardnessTimber 3-Strip Oak Flame has a rating of 3.7 HB.< br>
The Brinell test is the official and accepted method for determining the hardness of wood. To calculate the indicator, a hardened steel ball with a diameter of up to 10 mm is pressed into a smooth (sometimes polished) wood surface for 10-15 seconds under a load of 3000 kgf. The resulting print is measured with a special device, and the HB value (Hardness Brinell - Brinell hardness) is calculated using a special formula.
Soft wood: 1.5 - 2.4 HB
Hard wood: 2.5 - 7 HB
Very hard wood: 7.1 Р 8 HB