Timber Parquet 1-Strip Oak Bora
Timber 1-strip Oak Bora has the following characteristics:
GradingNatural - this sorting requires a moderate amount of knots and no sharp color changes. Sapwood is rare.
SurfaceBrushed is the result of working the surface of the board with a stiff metal brush. The brushing process removes soft wood fibers. The coating acquires a natural look and a relief surface.
Finish coatingOil is an environmentally friendly coating with an average degree of protection against mechanical damage. Visually emphasizes the naturalness of wood. Oiled floors can be restored locally.
ChamferTimber Parquet 1-strip Oak Bora has a bevel on 4 sides - cut along long and short side. Such a chamfer visually expands the space and emphasizes the individuality and massiveness of all floor elements.
Strip widthNarrow С recommended for laying in small spaces, since such parquet visually enlarges space.
Wood hardnessTimber parquet 1-strip Oak Bora has a value of 3.7 HB.
Brinell test is the official and generally accepted method for determining the hardness of wood. To calculate the indicator, a hardened steel ball with a diameter of up to 10 mm is pressed into a smooth (sometimes polished) wood surface for 10-15 seconds under a load of 3000 kgf. The resulting print is measured with a special device, and the HB value (Hardness Brinell - Brinell hardness) is calculated using a special formula.
Soft wood: 1.5 - 2.4 HB
Hard wood: 2.5 - 7 HB
Very hard wood: 7.1 Р 8 HB