Parquet board Tarkett Step XL Oak Baron 1000 (Oak Baron)
Tarkett Step XL parquet board Oak Baron 1000 (Oak Baron) has the following characteristics:
SortingNatural - this sorting assumes the presence of a moderate amount of knots and no sharp color changes. Sapwood is rare.
SurfaceBrushed is the result of working the surface of the board with a stiff metal brush. The brushing process removes soft wood fibers. The coating acquires a natural look and a relief surface.
Finish coatingThe lacquer coating has a high level of protection against moisture and mechanical damage. The lacquered floor does not require frequent maintenance and cannot be restored locally.
ChamferTarkett Step XL parquet board Oak Baron 1000 (Oak Baron) has a chamfer with 2 x sides - cut along the long side. Such a chamfer visually stretches the space and creates an Тendless board effectУ.
Slat widthStandard is the most common indicator for all manufacturers. Standard width parquet is suitable for any room size.
Wood hardnessTarkett Step XL parquet board Oak Baron 1000 (Oak Baron) has a value of 3.7 HB.< br>
The Brinell test is the official and accepted method for determining the hardness of wood. To calculate the indicator, a hardened steel ball with a diameter of up to 10 mm is pressed into a smooth (sometimes polished) wood surface for 10-15 seconds under a load of 3000 kgf. The resulting print is measured with a special device, and the HB value (Hardness Brinell - Brinell hardness) is calculated using a special formula.
Soft wood: 1.5 - 2.4 HB
Hard wood: 2.5 - 7 HB
Very hard wood: 7.1 Р 8 HB