Parquet board Tarkett Rumba Oak Lava Brush (Oak Lava)
The Tarkett Rumba Oak Lava parquet board has the following characteristics:
SortingNatural - this sorting assumes a moderate amount of knots and not sharp color changes. Sapwood is rare.
SurfaceBrushed is the result of working the surface of the board with a stiff metal brush. The brushing process removes soft wood fibers. The coating acquires a natural look and a relief surface.
Finish coatingThe lacquer coating has a high level of protection against moisture and mechanical damage. A lacquered floor does not require frequent maintenance and cannot be locally restored.
ChamferTarkett Rumba Parquet Oak Lava Brush (Oak Lava) has a chamfer with 2- x sides - cut along the long side. Such a chamfer visually stretches the space and creates an Тendless board effectУ.
Slat widthNarrow С recommended for laying in small spaces, since such parquet visually enlarges the space .
Wood hardnessTarkett Rumba parquet Oak Lava Brush (Oak Lava) has a value of 3.7 HB.
The Brinell test is official and the generally accepted method for determining the hardness of wood. To calculate the indicator, a hardened steel ball with a diameter of up to 10 mm is pressed into a smooth (sometimes polished) wood surface for 10-15 seconds under a load of 3000 kgf. The resulting print is measured with a special device, and the HB value (Hardness Brinell - Brinell hardness) is calculated using a special formula.
Soft wood: 1.5 - 2.4 HB
Hard wood: 2.5 - 7 HB
Very hard wood: 7.1 Р 8 HB